import time from tqdm import tqdm from loguru import logger from bit_tools import openBrowser from DrissionPage import ChromiumPage from DrissionPage import ChromiumOptions from bitmart.api_contract import APIContract class BitmartFuturesTransaction: def __init__(self, bit_id): self.page: ChromiumPage | None = None self.api_key = "a0fb7b98464fd9bcce67e7c519d58ec10d0c38a8" self.secret_key = "4eaeba78e77aeaab1c2027f846a276d164f264a44c2c1bb1c5f3be50c8de1ca5" self.memo = "合约交易" self.contract_symbol = "ETHUSDT" self.contractAPI = APIContract(self.api_key, self.secret_key, self.memo, timeout=(5, 15)) self.start = 0 # 持仓状态: -1 空, 0 无, 1 多 self.pbar = tqdm(total=30, desc="等待K线", ncols=80) # 可选：用于长时间等待时展示进度 self.last_kline_time = None # 上一次处理的K线时间戳，用于判断是否是新K线 # 反手频率控制 self.reverse_cooldown_seconds = 1.5 * 60 # 反手冷却时间（秒） self.reverse_min_move_pct = 0.05 # 反手最小价差过滤（百分比） self.last_reverse_time = None # 上次反手时间 # 开仓频率控制 self.open_cooldown_seconds = 60 # 开仓冷却时间（秒），两次开仓至少间隔此时长 self.last_open_time = None # 上次开仓时间 self.last_open_kline_id = None # 上次开仓所在 K 线 id，同一根 K 线只允许开仓一次 self.leverage = "100" # 高杠杆（全仓模式下可开更大仓位） self.open_type = "cross" # 全仓模式 self.risk_percent = 0 # 未使用；若启用则可为每次开仓占可用余额的百分比 self.take_profit_usd = 5 # 仓位盈利达到此金额（美元）时平仓止盈 self.stop_loss_usd = -3 # 固定止损：亏损达到 3 美元平仓 self.trailing_activation_usd = 2 # 盈利达到此金额后启动移动止损 self.trailing_distance_usd = 1.5 # 从最高盈利回撤此金额则平仓 self.max_unrealized_pnl_seen = None # 持仓期间见过的最大盈利（用于移动止损） self.open_avg_price = None # 开仓价格 self.current_amount = None # 持仓量 self.bit_id = bit_id self.default_order_size = 25 # 开仓/反手张数，统一在此修改 # 策略相关变量 self.prev_kline = None # 上一根K线 self.current_kline = None # 当前K线 self.prev_entity = None # 上一根K线实体大小 self.current_open = None # 当前K线开盘价 def get_klines(self): """获取最近2根K线（当前K线和上一根K线）""" try: end_time = int(time.time()) # 获取足够多的条目确保有最新的K线 response = self.contractAPI.get_kline( contract_symbol=self.contract_symbol, step=5, # 5分钟 start_time=end_time - 3600 * 3, # 取最近3小时 end_time=end_time )[0]["data"] # 每根: [timestamp, open, high, low, close, volume] formatted = [] for k in response: formatted.append({ 'id': int(k["timestamp"]), 'open': float(k["open_price"]), 'high': float(k["high_price"]), 'low': float(k["low_price"]), 'close': float(k["close_price"]) }) formatted.sort(key=lambda x: x['id']) # 返回最近2根K线：倒数第二根（上一根）和最后一根（当前） if len(formatted) >= 2: return formatted[-2], formatted[-1] return None, None except Exception as e: logger.error(f"获取K线异常: {e}") self.ding(text="获取K线异常", error=True) return None, None def get_current_price(self): """获取当前最新价格""" try: end_time = int(time.time()) response = self.contractAPI.get_kline( contract_symbol=self.contract_symbol, step=1, # 1分钟 start_time=end_time - 3600 * 1, # 取最近1小时 end_time=end_time )[0] if response['code'] == 1000: return float(response['data'][-1]["close_price"]) return None except Exception as e: logger.error(f"获取价格异常: {e}") return None def get_available_balance(self): """获取合约账户可用USDT余额""" try: response = self.contractAPI.get_assets_detail()[0] if response['code'] == 1000: data = response['data'] if isinstance(data, dict): return float(data.get('available_balance', 0)) elif isinstance(data, list): for asset in data: if asset.get('currency') == 'USDT': return float(asset.get('available_balance', 0)) return None except Exception as e: logger.error(f"余额查询异常: {e}") return None def get_position_status(self): """获取当前持仓方向""" try: response = self.contractAPI.get_position(contract_symbol=self.contract_symbol)[0] if response['code'] == 1000: positions = response['data'] if not positions: self.start = 0 self.open_avg_price = None self.current_amount = None self.unrealized_pnl = None return True pos = positions[0] self.start = 1 if pos['position_type'] == 1 else -1 self.open_avg_price = float(pos['open_avg_price']) self.current_amount = float(pos['current_amount']) self.position_cross = pos["position_cross"] # 直接从API获取未实现盈亏（Bitmart返回的是 unrealized_value 字段） self.unrealized_pnl = float(pos.get('unrealized_value', 0)) logger.debug(f"持仓详情: 方向={self.start}, 开仓均价={self.open_avg_price}, " f"持仓量={self.current_amount}, 未实现盈亏={self.unrealized_pnl:.2f}") return True else: return False except Exception as e: logger.error(f"持仓查询异常: {e}") return False def get_unrealized_pnl_usd(self): """ 获取当前持仓未实现盈亏（美元），直接使用API返回值 """ if self.start == 0 or self.unrealized_pnl is None: return None return self.unrealized_pnl def set_leverage(self): """程序启动时设置全仓 + 高杠杆""" try: response = self.contractAPI.post_submit_leverage( contract_symbol=self.contract_symbol, leverage=self.leverage, open_type=self.open_type )[0] if response['code'] == 1000: logger.success(f"全仓模式 + {self.leverage}x 杠杆设置成功") return True else: logger.error(f"杠杆设置失败: {response}") return False except Exception as e: logger.error(f"设置杠杆异常: {e}") return False def openBrowser(self): """打开 TGE 对应浏览器实例""" try: bit_port = openBrowser(id=self.bit_id) co = ChromiumOptions() co.set_local_port(port=bit_port) self.page = ChromiumPage(addr_or_opts=co) return True except: return False def click_safe(self, xpath, sleep=0.5): """安全点击""" try: ele = self.page.ele(xpath) if not ele: return False # ele.scroll.to_see(center=True) # time.sleep(sleep) ele.click(by_js=True) return True except: return False def 平仓(self): """平仓操作""" self.click_safe('x://span[normalize-space(text()) ="市价"]') def 开单(self, marketPriceLongOrder=0, limitPriceShortOrder=0, size=None, price=None): """ marketPriceLongOrder 市价做多或者做空，1是做多，-1是做空 limitPriceShortOrder 限价做多或者做空 """ if marketPriceLongOrder == -1: # self.click_safe('x://button[normalize-space(text()) ="市价"]') # self.page.ele('x://*[@id="size_0"]').input(vals=size, clear=True) self.click_safe('x://span[normalize-space(text()) ="卖出/做空"]') elif marketPriceLongOrder == 1: # self.click_safe('x://button[normalize-space(text()) ="市价"]') # self.page.ele('x://*[@id="size_0"]').input(vals=size, clear=True) self.click_safe('x://span[normalize-space(text()) ="买入/做多"]') if limitPriceShortOrder == -1: self.click_safe('x://button[normalize-space(text()) ="限价"]') self.page.ele('x://*[@id="price_0"]').input(vals=price, clear=True) time.sleep(1) self.page.ele('x://*[@id="size_0"]').input(1) self.click_safe('x://span[normalize-space(text()) ="卖出/做空"]') elif limitPriceShortOrder == 1: self.click_safe('x://button[normalize-space(text()) ="限价"]') self.page.ele('x://*[@id="price_0"]').input(vals=price, clear=True) time.sleep(1) self.page.ele('x://*[@id="size_0"]').input(1) self.click_safe('x://span[normalize-space(text()) ="买入/做多"]') def ding(self, text, error=False): """日志通知""" if error: logger.error(text) else: logger.info(text) def calculate_entity(self, kline): """计算K线实体大小（绝对值）""" return abs(kline['close'] - kline['open']) def calculate_upper_shadow(self, kline): """计算上阴线（上影线）涨幅百分比""" # 上阴线 = (最高价 - max(开盘价, 收盘价)) / max(开盘价, 收盘价) body_top = max(kline['open'], kline['close']) if body_top == 0: return 0 return (kline['high'] - body_top) / body_top * 100 def calculate_lower_shadow(self, kline): """计算下阴线（下影线）跌幅百分比""" # 下阴线 = (min(开盘价, 收盘价) - 最低价) / min(开盘价, 收盘价) body_bottom = min(kline['open'], kline['close']) if body_bottom == 0: return 0 return (body_bottom - kline['low']) / body_bottom * 100 def get_entity_edge(self, kline): """获取K线实体边（收盘价或开盘价，取决于是阳线还是阴线）""" # 阳线（收盘>开盘）：实体上边=收盘价，实体下边=开盘价 # 阴线（收盘<开盘）：实体上边=开盘价，实体下边=收盘价 return { 'upper': max(kline['open'], kline['close']), # 实体上边 'lower': min(kline['open'], kline['close']) # 实体下边 } def check_signal(self, current_price, prev_kline, current_kline): """ 检查交易信号 返回: ('long', trigger_price) / ('short', trigger_price) / None """ # 计算上一根K线实体 prev_entity = self.calculate_entity(prev_kline) # 实体过小不交易（实体 < 0.1） if prev_entity < 0.1: logger.info(f"上一根K线实体过小: {prev_entity:.4f}，跳过信号检测") return None # 获取上一根K线的实体上下边 prev_entity_edge = self.get_entity_edge(prev_kline) prev_entity_upper = prev_entity_edge['upper'] # 实体上边 prev_entity_lower = prev_entity_edge['lower'] # 实体下边 # 优化：以下两种情况以当前这根的开盘价作为计算基准 # 1) 上一根阳线 且 当前开盘价 > 上一根收盘价（跳空高开） # 2) 上一根阴线 且 当前开盘价 < 上一根收盘价（跳空低开） prev_is_bullish_for_calc = prev_kline['close'] > prev_kline['open'] prev_is_bearish_for_calc = prev_kline['close'] < prev_kline['open'] current_open_above_prev_close = current_kline['open'] > prev_kline['close'] current_open_below_prev_close = current_kline['open'] < prev_kline['close'] use_current_open_as_base = (prev_is_bullish_for_calc and current_open_above_prev_close) or (prev_is_bearish_for_calc and current_open_below_prev_close) if use_current_open_as_base: # 以当前K线开盘价为基准计算（跳空时用当前开盘价参与计算） calc_lower = current_kline['open'] calc_upper = current_kline['open'] # 同一基准，上下四分之一对称 long_trigger = calc_lower + prev_entity / 4 short_trigger = calc_upper - prev_entity / 4 long_breakout = calc_upper + prev_entity / 4 short_breakout = calc_lower - prev_entity / 4 else: # 原有计算方式 long_trigger = prev_entity_lower + prev_entity / 4 # 做多触发价 = 实体下边 + 实体/4（下四分之一处） short_trigger = prev_entity_upper - prev_entity / 4 # 做空触发价 = 实体上边 - 实体/4（上四分之一处） long_breakout = prev_entity_upper + prev_entity / 4 # 做多突破价 = 实体上边 + 实体/4 short_breakout = prev_entity_lower - prev_entity / 4 # 做空突破价 = 实体下边 - 实体/4 # 上一根阴线 + 当前阳线：做多形态，不按上一根K线上三分之一做空 prev_is_bearish = prev_kline['close'] < prev_kline['open'] current_is_bullish = current_kline['close'] > current_kline['open'] skip_short_by_upper_third = prev_is_bearish and current_is_bullish # 上一根阳线 + 当前阴线：做空形态，不按上一根K线下三分之一做多 prev_is_bullish = prev_kline['close'] > prev_kline['open'] current_is_bearish = current_kline['close'] < current_kline['open'] skip_long_by_lower_third = prev_is_bullish and current_is_bearish if use_current_open_as_base: if prev_is_bullish_for_calc and current_open_above_prev_close: logger.info(f"上一根阳线且当前开盘价({current_kline['open']:.2f})>上一根收盘价({prev_kline['close']:.2f})，以当前开盘价为基准计算") else: logger.info(f"上一根阴线且当前开盘价({current_kline['open']:.2f})<上一根收盘价({prev_kline['close']:.2f})，以当前开盘价为基准计算") logger.info(f"当前价格: {current_price:.2f}, 上一根实体: {prev_entity:.4f}") logger.info(f"上一根实体上边: {prev_entity_upper:.2f}, 下边: {prev_entity_lower:.2f}") logger.info(f"做多触发价(下1/4): {long_trigger:.2f}, 做空触发价(上1/4): {short_trigger:.2f}") logger.info(f"突破做多价(上1/4外): {long_breakout:.2f}, 突破做空价(下1/4外): {short_breakout:.2f}") if skip_short_by_upper_third: logger.info("上一根阴线+当前阳线(做多形态)，不按上四分之一做空") if skip_long_by_lower_third: logger.info("上一根阳线+当前阴线(做空形态)，不按下四分之一做多") # 无持仓时检查开仓信号 if self.start == 0: if current_price >= long_breakout and not skip_long_by_lower_third: logger.info(f"触发做多信号！价格 {current_price:.2f} >= 突破价(上1/4外) {long_breakout:.2f}") return ('long', long_breakout) elif current_price <= short_breakout and not skip_short_by_upper_third: logger.info(f"触发做空信号！价格 {current_price:.2f} <= 突破价(下1/4外) {short_breakout:.2f}") return ('short', short_breakout) # 持仓时检查反手信号 elif self.start == 1: # 持多仓 # 反手条件1: 价格跌到上一根K线的上三分之一处（做空触发价）；上一根阴线+当前阳线做多时跳过 if current_price <= short_trigger and not skip_short_by_upper_third: logger.info(f"持多反手做空！价格 {current_price:.2f} <= 触发价(上1/4) {short_trigger:.2f}") return ('reverse_short', short_trigger) # 反手条件2: 上一根K线上阴线涨幅>0.01%，当前跌到上一根实体下边 upper_shadow_pct = self.calculate_upper_shadow(prev_kline) if upper_shadow_pct > 0.01 and current_price <= prev_entity_lower: logger.info(f"持多反手做空！上阴线涨幅 {upper_shadow_pct:.4f}% > 0.01%，" f"价格 {current_price:.2f} <= 实体下边 {prev_entity_lower:.2f}") return ('reverse_short', prev_entity_lower) elif self.start == -1: # 持空仓 # 反手条件1: 价格涨到上一根K线的下三分之一处（做多触发价）；上一根阳线+当前阴线做空时跳过 if current_price >= long_trigger and not skip_long_by_lower_third: logger.info(f"持空反手做多！价格 {current_price:.2f} >= 触发价(下1/4) {long_trigger:.2f}") return ('reverse_long', long_trigger) # 反手条件2: 上一根K线下阴线跌幅>0.01%，当前涨到上一根实体上边 lower_shadow_pct = self.calculate_lower_shadow(prev_kline) if lower_shadow_pct > 0.01 and current_price >= prev_entity_upper: logger.info(f"持空反手做多！下阴线跌幅 {lower_shadow_pct:.4f}% > 0.01%，" f"价格 {current_price:.2f} >= 实体上边 {prev_entity_upper:.2f}") return ('reverse_long', prev_entity_upper) return None def can_open(self, current_kline_id): """开仓前过滤：同一根 K 线只开一次 + 开仓冷却时间。仅用于 long/short 新开仓。""" now = time.time() if self.last_open_kline_id is not None and self.last_open_kline_id == current_kline_id: logger.info(f"开仓频率控制：本 K 线({current_kline_id})已开过仓，跳过") return False if self.last_open_time is not None and now - self.last_open_time < self.open_cooldown_seconds: remain = self.open_cooldown_seconds - (now - self.last_open_time) logger.info(f"开仓冷却中，剩余 {remain:.0f} 秒") return False return True def can_reverse(self, current_price, trigger_price): """反手前过滤：冷却时间 + 最小价差""" now = time.time() if self.last_reverse_time and now - self.last_reverse_time < self.reverse_cooldown_seconds: remain = self.reverse_cooldown_seconds - (now - self.last_reverse_time) logger.info(f"反手冷却中，剩余 {remain:.0f} 秒") return False if trigger_price and trigger_price > 0: move_pct = abs(current_price - trigger_price) / trigger_price * 100 if move_pct < self.reverse_min_move_pct: logger.info(f"反手价差不足: {move_pct:.4f}% < {self.reverse_min_move_pct}%") return False return True def verify_no_position(self, max_retries=5, retry_interval=3): """ 验证当前无持仓 返回: True 表示无持仓可以开仓，False 表示有持仓不能开仓 """ for i in range(max_retries): if self.get_position_status(): if self.start == 0: logger.info(f"确认无持仓，可以开仓") return True else: logger.warning( f"仍有持仓 (方向: {self.start})，等待 {retry_interval} 秒后重试 ({i + 1}/{max_retries})") time.sleep(retry_interval) else: logger.warning(f"查询持仓状态失败，等待 {retry_interval} 秒后重试 ({i + 1}/{max_retries})") time.sleep(retry_interval) logger.error(f"经过 {max_retries} 次重试仍有持仓或查询失败，放弃开仓") return False def verify_position_direction(self, expected_direction): """ 验证当前持仓方向是否与预期一致 expected_direction: 1 多仓, -1 空仓 返回: True 表示持仓方向正确，False 表示不正确 """ if self.get_position_status(): if self.start == expected_direction: logger.info(f"持仓方向验证成功: {self.start}") return True else: logger.warning(f"持仓方向不符: 期望 {expected_direction}, 实际 {self.start}") return False else: logger.error("查询持仓状态失败") return False def execute_trade(self, signal, size=None): """执行交易。size 不传或为 None 时使用 default_order_size。""" signal_type, trigger_price = signal size = self.default_order_size if size is None else size if signal_type == 'long': # 开多前先确认无持仓 logger.info(f"准备开多，触发价: {trigger_price:.2f}") if not self.get_position_status(): logger.error("开仓前查询持仓状态失败，放弃开仓") return False if self.start != 0: logger.warning(f"开多前发现已有持仓 (方向: {self.start})，放弃开仓避免双向持仓") return False logger.info(f"确认无持仓，执行开多") self.开单(marketPriceLongOrder=1, size=size) time.sleep(3) # 等待订单执行 # 验证开仓是否成功 if self.verify_position_direction(1): self.max_unrealized_pnl_seen = None # 新仓位重置移动止损记录 self.last_open_time = time.time() self.last_open_kline_id = getattr(self, "_current_kline_id_for_open", None) logger.success("开多成功") return True else: logger.error("开多后持仓验证失败") return False elif signal_type == 'short': # 开空前先确认无持仓 logger.info(f"准备开空，触发价: {trigger_price:.2f}") if not self.get_position_status(): logger.error("开仓前查询持仓状态失败，放弃开仓") return False if self.start != 0: logger.warning(f"开空前发现已有持仓 (方向: {self.start})，放弃开仓避免双向持仓") return False logger.info(f"确认无持仓，执行开空") self.开单(marketPriceLongOrder=-1, size=size) time.sleep(3) # 等待订单执行 # 验证开仓是否成功 if self.verify_position_direction(-1): self.max_unrealized_pnl_seen = None # 新仓位重置移动止损记录 self.last_open_time = time.time() self.last_open_kline_id = getattr(self, "_current_kline_id_for_open", None) logger.success("开空成功") return True else: logger.error("开空后持仓验证失败") return False elif signal_type == 'reverse_long': # 平空 + 开多（反手做多）：先平仓，确认无仓后再开多，避免双向持仓 logger.info(f"执行反手做多，触发价: {trigger_price:.2f}") self.平仓() time.sleep(1) # 给交易所处理平仓的时间 # 轮询确认已无持仓再开多（最多等约 10 秒） for _ in range(10): if self.get_position_status() and self.start == 0: break time.sleep(1) if self.start != 0: logger.warning("反手做多：平仓后仍有持仓，放弃本次开多") return False logger.info("已确认无持仓，执行开多") self.开单(marketPriceLongOrder=1, size=size) time.sleep(3) if self.verify_position_direction(1): self.max_unrealized_pnl_seen = None logger.success("反手做多成功") self.last_reverse_time = time.time() time.sleep(20) return True else: logger.error("反手做多后持仓验证失败") return False elif signal_type == 'reverse_short': # 平多 + 开空（反手做空）：先平仓，确认无仓后再开空 logger.info(f"执行反手做空，触发价: {trigger_price:.2f}") self.平仓() time.sleep(1) for _ in range(10): if self.get_position_status() and self.start == 0: break time.sleep(1) if self.start != 0: logger.warning("反手做空：平仓后仍有持仓，放弃本次开空") return False logger.info("已确认无持仓，执行开空") self.开单(marketPriceLongOrder=-1, size=size) time.sleep(3) if self.verify_position_direction(-1): self.max_unrealized_pnl_seen = None logger.success("反手做空成功") self.last_reverse_time = time.time() time.sleep(20) return True else: logger.error("反手做空后持仓验证失败") return False return False def action(self): """主循环""" logger.info("开始运行四分之一策略交易...") # 启动时设置全仓高杠杆 if not self.set_leverage(): logger.error("杠杆设置失败，程序继续运行但可能下单失败") return page_start = True while True: if page_start: # 打开浏览器 for i in range(5): if self.openBrowser(): logger.info("浏览器打开成功") break else: self.ding("打开浏览器失败！", error=True) return # 进入交易页面 self.page.get("https://derivatives.bitmart.com/zh-CN/futures/ETHUSDT") self.click_safe('x://button[normalize-space(text()) ="市价"]') self.page.ele('x://*[@id="size_0"]').input(vals=25, clear=True) page_start = False try: # 1. 获取K线数据（当前K线和上一根K线） prev_kline, current_kline = self.get_klines() if not prev_kline or not current_kline: logger.warning("获取K线失败，等待重试...") time.sleep(5) continue # 记录进入新的K线 current_kline_time = current_kline['id'] if self.last_kline_time != current_kline_time: self.last_kline_time = current_kline_time logger.info(f"进入新K线: {current_kline_time}") # 2. 获取当前价格 current_price = self.get_current_price() if not current_price: logger.warning("获取价格失败，等待重试...") time.sleep(2) continue # 3. 每次循环都通过SDK获取真实持仓状态（避免状态不同步导致双向持仓） if not self.get_position_status(): logger.warning("获取持仓状态失败，等待重试...") time.sleep(2) continue logger.debug(f"当前持仓状态: {self.start} (0=无, 1=多, -1=空)") # 3.5 止损/止盈/移动止损 if self.start != 0: pnl_usd = self.get_unrealized_pnl_usd() if pnl_usd is not None: # 固定止损：亏损达到 3 美元平仓 if pnl_usd <= self.stop_loss_usd: logger.info(f"仓位亏损 {pnl_usd:.2f} 美元 <= 止损 {self.stop_loss_usd} 美元，执行止损平仓") self.平仓() self.max_unrealized_pnl_seen = None time.sleep(3) continue # 更新持仓期间最大盈利（用于移动止损） if self.max_unrealized_pnl_seen is None: self.max_unrealized_pnl_seen = pnl_usd else: self.max_unrealized_pnl_seen = max(self.max_unrealized_pnl_seen, pnl_usd) # 移动止损：盈利曾达到 activation 后，从最高盈利回撤 trailing_distance 则平仓 if self.max_unrealized_pnl_seen >= self.trailing_activation_usd: if pnl_usd < self.max_unrealized_pnl_seen - self.trailing_distance_usd: logger.info(f"移动止损：当前盈利 {pnl_usd:.2f} 从最高 {self.max_unrealized_pnl_seen:.2f} 回撤 >= {self.trailing_distance_usd} 美元，平仓") self.平仓() self.max_unrealized_pnl_seen = None time.sleep(3) continue # 止盈：盈利达到 take_profit_usd 平仓 if pnl_usd >= self.take_profit_usd: logger.info(f"仓位盈利 {pnl_usd:.2f} 美元 >= {self.take_profit_usd} 美元，执行止盈平仓") self.平仓() self.max_unrealized_pnl_seen = None time.sleep(3) continue # 4. 检查信号 signal = self.check_signal(current_price, prev_kline, current_kline) # 5. 反手过滤：冷却时间 + 最小价差 if signal and signal[0].startswith('reverse_'): if not self.can_reverse(current_price, signal[1]): signal = None # 5.5 开仓频率过滤：同一根 K 线只开一次 + 开仓冷却 if signal and signal[0] in ('long', 'short'): if not self.can_open(current_kline_time): signal = None else: self._current_kline_id_for_open = current_kline_time # 供 execute_trade 成功后记录 # 6. 有信号则执行交易 if signal: trade_success = self.execute_trade(signal) if trade_success: logger.success(f"交易执行完成: {signal[0]}, 当前持仓状态: {self.start}") page_start = True else: logger.warning(f"交易执行失败或被阻止: {signal[0]}") # 短暂等待后继续循环（同一根K线遇到信号就操作） time.sleep(0.1) if page_start: self.page.close() time.sleep(5) except KeyboardInterrupt: logger.info("用户中断，程序退出") break except Exception as e: logger.error(f"主循环异常: {e}") time.sleep(5) if __name__ == '__main__': BitmartFuturesTransaction(bit_id="f2320f57e24c45529a009e1541e25961").action()